Tuesday, 17 October 2017

Audi A6L 2013 5th immo add key using Xtool x100 pad2 with KC100 adapter

Have Audi A6L 2013 with 5th immo to add new keys, highly recommend Xtool x100 pad2 with KC100 adapter. Seeing is believing, read the step-by-step procedure in the following paragraphs.
Have Audi A6L 2013 with 5th immo to add new keys, highly recommend Xtool x100 pad2 with KC100 adapter. Seeing is believing, read the step-by-step procedure in the following paragraphs. 图1 The first one key is original and the remote is working, the second one is blank to be programmed. 图2 1. I complete a Youtube video, attach here: <iframe width="560" height="315" src="https://www.youtube.com/embed/MjAmFxDEl2Q" frameborder="0" allowfullscreen></iframe> Read me: www.xtooltech.com marked in this video is the official site of Xtool x100 pad2. www.uobdii.com is a trustworthy shop I bought and will buy Xtool x100 pad2 2. If you have trouble to watch the video, please go on reading the step-by-step procedure as below: Tap "X100 pad2" on the screen. Tap "VW/Audi Skoda / Seat" 图3 Tap "4th/5th immobilizer system". 图4 You will have 2 options "4th immobilizer system" and "5th immobilizer system", Audi A6L 2013 is 5th immobilizer system. 图5 pad2 can't identify the VIN code because the ignition doesn't turn on, go to switch the ignition on. 图6 Come to 5th immobilizer system function menu. 图7 1). Read immokey. 图8 9 10 2). Show security data Have 3 keys. 图11 3) Make dealer key. Please plug the KC100 into tablet, press (OK) to continue. The KC100 adapter indicator turn blue means it powers on. 图12 13 14 Put the original key into the coil of KC100 adapter. 图15 Then put the blank key that ready to add to the coil of KC100 adapter 16 Writting key... Create dealer key success. 17 4) Learn the key. Turn the ignition on, click "OK". Read the note shown as below. 图18 Input the number of keys to match 19 Put the blank key to the sensor area. 20 The first one learn successfully. 21 Then put the second one to learn, after learn with success, it prompts "Learning success" 22 Finish match the key. 23 Tap "Return" button to exit the system. To identify the two keys are working or not. They are working fine. 24 Now I take one key outside of the car and leave one key in the car. Start the engine. the first key can turn on. 25. Take the first one outside of the car, and another one in the car, start the engine, the key start turn on ok. The remote is working. Done! The truth: Xtool x100 pad2 with KC100 adapter is tested able to add new keys for Audi A6L 2013 with 5th immo.
The first one key is original and the remote is working, the second one is blank to be programmed.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-02
  1. I complete a Youtube video, attach here:

Read me:
www.xtooltech.com marked in this video is the official site of Xtool x100 pad2.
www.uobdii.com is a trustworthy shop I bought and will buy Xtool x100 pad2

  1. If you have trouble to watch the video, please go on reading the step-by-step procedure as below:
Tap "X100 pad2" on the screen.

Tap "VW/Audi Skoda / Seat"
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-03

Tap "4th/5th immobilizer system".
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-04

You will have 2 options "4th immobilizer system" and "5th immobilizer system", Audi A6L 2013 is 5th immobilizer system.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-05
pad2 can't identify the VIN code because the ignition doesn't turn on, go to switch the ignition on.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-06

Come to 5th immobilizer system function menu.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-07

1). Read immokey.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-08 audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-09 audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-10

2). Show security data
Have 3 keys.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-11
3) Make dealer key.
Please plug the KC100 into tablet, press (OK) to continue.
The KC100 adapter indicator turn blue means it powers on.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-12 audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-13 audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-14

Put the original key into the coil of KC100 adapter.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-15

Then put the blank key that ready to add to the coil of KC100 adapter
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-16

Writting key...

Create dealer key success.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-17

4) Learn the key.
Turn the ignition on, click "OK".
Read the note shown as below.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-18
Input the number of keys to match
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-19
Put the blank key to the sensor area.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-20
The first one learn successfully.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-21
Then put the second one to learn, after learn with success, it prompts "Learning success"
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-22
Finish match the key.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-22
Tap "Return" button to exit the system.

To identify the two keys are working or not.

They are working fine.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-24

Now I take one key outside of the car and leave one key in the car.

Start the engine. the first key can turn on.
audi -A6L-2013-5th- immo-add-key-xtool-x100-pad2-with-kc100-adapter-25

Take the first one outside of the car, and another one in the car, start the engine, the key start turn on ok.

The remote is working.

Done!
The truth: Xtool x100 pad2 with KC100 adapter is tested able to add new keys for Audi A6L 2013 with 5th immo.

Monday, 3 April 2017

XTOOL X100 PAD2 Oil Reset Functions Introduction

X-100 PAD2 is the first tablet key programmer in the world! It not only provides customers with professional key programming, but also the most needed special functions for workshop.




XTOOL X-100 PAD2 Oil Reset Functions Features:

Innovative one-click oil reset for VW, Audi, BMW, Mercedes Seat, Skoda, Volvo, etc.
Support engine oil, spark plugs, front brake pads, back brake pads, air conditioner, brake liquid, coolant liquid, vehicle checking , etc. resetting for BMW. And the supported BMW models are F01/F02/F03/F04/F07/F10/F11/F12/F13/F18/F20/F30, etc.
Support Mercedes Benz new C Class, E Class models and Mercedes Benz VITO/VIANO/SPINTER.
Support the lifespan percentage resetting of engine oil for Buick, Cadillac etc.
 Support Porsche Cayenne, Panamera till 2012
Support maintenance light reset for Volvo, Land Rover.
Xtool x100 pad2 detail info:http://www.uobdii.com/wholesale/xtool-x-100-pad-2.html

Article form:http://tech-and-support-for-obd2.webnode.com/blog/

Tuesday, 13 December 2016

Xtool X100 Pad and Xtool X100 PAD 2 tablet key programmer Comparision Table (

Function Comparison Xtool X100 PAD Xtool X100 PAD2 Standard Configuration Xtool X100 PAD2 Full Configuration  
Multiplexer Picture

 
 
OBDII Diagnosis No Diagnosis and immo function cover on the same cars. Four System Diagnosis:Engine control module, Brakes, central electrics, airbag. Diagnosis and immo function cover on the same cars. Four System Diagnosis:Engine control module, Brakes, central electrics, airbag.
Immobilizer programming Yes It is optional to pay VW 4th /5th generation immobilizer programming. Packed with a XTOOL KC100 adapter, supports VW 4th/5th generation immobilizer programming.
Oil Reset/Engine oil light reset Yes Yes Yes
TPS Throttle Body Adaptation Yes Yes Yes
Odometer Adjustment Yes Yes Yes
EPB Electrical Parking Brake Adaptation Yes Yes Yes
Steering Angle Calibration Yes Yes Yes
ABS Exhaust Yes Yes Yes
Battery reset Yes Yes Yes
Headlight adjustment No Yes Yes
Gear learning Yes Yes Yes
tire pressure warning light reset Yes Yes Yes
ECU reset Yes Yes Yes
EEPROM adapter Yes Yes Yes
Exhaust Gas Treatment (DPF) Yes Yes Yes
Car Suspension No Yes Yes

Specification Comparison

X100 PAD

X100 PAD2 Standard / Full Configuration
   
CPU 1.3GHZ 1.6GHZ
Operation system Android 4.4 Android 4.4
Memory 16G RAM:1G Flash 1GB RAM, 16GB Flash
Battery capacity 2400mAh7.4V 4000mAh7.4V
Resolution 1024*600 1024*768
Display 7 inch IPS 5-point multi-touch screen 8.0 Inch IPS 5-Point Multi-touch Screen
HD input/output Port MINI HDMI MINI HDMI
Communication via Bluetooth Via cable
Standby Time 5h 8h
WIFI 2.4GHZ 2.4GHZ
Connection method By Wireless (Bluetooth) Via cable
Dimension 208*140*15.5mm 240*177*30mm





How Does Xtool X100 PAD Change Mileage for Fiat Punto 2005 Quickly?

Using the scanner Xtool X100 PAD, we will change mileage for Fiat Punto's 1.2 MK3 petrol-powered 2005 Europe.

Approximate process:

1. Enter mileage adjustment menu

2. Choose vehicle model

3. Input new mileage and Done!

Device: XTOOL X100 PAD Tablet Key Programmer





Vehicle: Fiat Punto's 1.2 MK3 petrol-powered 2005 Europe



Current mileage:
Connect X100PAD with your Fiat Punto




Open it and click on [X-100 PAD]


Then choose [Odometer adjustment]


Agree the disclaimer



Choose your vehicle: FIAT-> Punto



Select [Punto 95040]
[Mile]



Then click on [Change Mileage] on Bottom left corner

Input the mileage of the adjustment and click OK
Done! Adjustment complete! Click OK

Let’s see the current mileage

(Due to the algorithm, the input value may slightly deviate from the displayed value)


Conclusion:

X100 PAD is very easy to operate, the total process only need several minutes.

Mileage adjustment is one function of X-100 PAD, it can also perform key programming, oil service light reset, timing belt service light reset, tire pressure warning light reset , EPB reset, throttle body reset, DPF reset, battery reset, steering angle calibration and OBD-II engine diagnosis.

Wednesday, 7 December 2016

How Does X100 PAD Program Keys for Mitsubishi Outlander All Key Lost

Xtool X100 PAD is the first tablet key programmer in the world! It not only supports professional key programming but also the most needed special functions for workshop. Here is step by step guidance for you to program keys for Mitsubishi Outlander 2009.

What you needed:
Vehicle: Mitsubishi Outlander 2009
Device: XTOOL X100 PAD
KEY: Mechanical key

Detailed procedures:
Conncect X100 PAD with vehicle and open the device
Insert the key and switch ignition on firstly
xtool-x100-pad-key-programmer-1
Choose “Immobiization”
xtool-x100-pad-key-programmer-2
Agree the disclaimer
xtool-x100-pad-key-programmer-3
Choose “MITSUBISHI”
xtool-x100-pad-key-programmer-4
And choose vehicle information
xtool-x100-pad-key-programmer-5
Select from vehicle
xtool-x100-pad-key-programmer-6
Select “Outlander”
xtool-x100-pad-key-programmer-7
“Without smart”
xtool-x100-pad-key-programmer-8
Then choose year of your vehicle
xtool-x100-pad-key-programmer-9
All key lost
xtool-x100-pad-key-programmer-10
Then input the security code and press OK to continue
Note: the security code of outlander is 8A42 in generally
xtool-x100-pad-key-programmer-11
It is communicating...
Done! Program success!
xtool-x100-pad-key-programmer-12
If you want to program another key, insert the next key and switch ignition on, then press OK
xtool-x100-pad-key-programmer-13

Xtool X100 PAD also support other vehicles made from Asia, Europe, America and China etc, for more detailed information, please click here:
http://www.uobdii.com/wholesale/xtool-x-100-pad-tablet-key-programmer.html